Completion Tools and Accesories
Benefits
- Features a nipple profile above and a packing bore above and below the communication ports.
- Ports can be closed without leaving any obstructions in the tubing once the shifting operation is completed
- The model B shifting tool is used to shift the inner sleeve by jarring up or down, jarring up will close the sleeve and jarring down will open it
- All premium threads are available. * Flow areas between tubing and annulus when sleeve is open, 4.112 square inches.
- Maximum temperature rating is 400°F.
- Sleeve is shown in closed position.
KFA CIRCULATING SLEEVE
The Model KFA Circulating Sleeve is a downhole flow control device mounted in the production tubing to provide communication between the tubing and casing annulus. It is opened by shifting an inner sleeve either up or down by standard wireline methods.
MATERIAL SELECTION
- 4140 L80
- 4140 P110
- 17-4PH Stainless Steel. 316 Stainless Steel
- 410 Stainless Steel
- 718 Inconnel. 9CH SOK MYS
- 13CH 8OK MYS (STD.) 13CH 90K MYS.
- 13CH 95K MYS
- 13CH 100K MYS.
WORKING PRESSURE RATING
- P.S.I. 5,800
- 4140 / 180 80,000 Yield
- 4140 / P110 110,000 Yield 8,000
- 17-4 S.S. 125,000 Yield 9,10

Benefits
- Features a nipple profile above and a packing bore above and below the communication ports.
- Ports can be closed without leaving any obstructions in the tubing once the shifting operation is completed
- The model B shifting tool is used to shift the inner sleeve by jarring up or down, jarring up will close the sleeve and jarring down will open it
- All premium threads are available. * Flow areas between tubing and annulus when sleeve is open, 4.112 square inches.
- Maximum temperature rating is 400°F.
- Sleeve is shown in closed position.
KFD CIRCULATING SLEEVE
The Model KFD Circulating Sleeve provides a convenient way to establish or shut off communication between the
tubing and the annulus. Any number of these sleeves may be run in a tubing string, and any or all of them may be opened or closed in one run by standard wireline methods.
MATERIAL SELECTION
- 4140 L80
- 4140 P110
- 17-4PH Stainless Steel. 316 Stainless Steel
- 410 Stainless Steel
- 718 Inconnel. 9CH SOK MYS
- 13CH 8OK MYS (STD.) 13CH 90K MYS.
- 13CH 95K MYS
- 13CH 100K MYS.
WORKING PRESSURE RATING
- P.S.I. 5,800
- 4140 / 180 80,000 Yield
- 4140 / P110 110,000 Yield 8,000
- 17-4 S.S. 125,000 Yield 9,10

Benefits
- Features a nipple profile above and a packing bore above and below the communication ports.
- Ports can be closed without leaving any obstructions in the tubing once the shifting operation is completed
- The model B shifting tool is used to shift the inner sleeve by jarring up or down, jarring up will open the sleeve and jarring down will close it.
- All premium threads are available. Flow areas between tubing and annulus when sleeve is open, 2.398 square inches.
- Sleeve is shown in closed position. All packing and o-rings are non-elastomer.
- Non-elastomer (peek, polyketone) has excellent chemical resistance to H2S and Co2
- peek compounds are suitable for service up to 500° F. It is a thermoplastic polymer and the melting point is approximately 650° F
- PTFP compounds are: 711 = 25% Carbon, Graphite 717 = 20% Calcium Fluoride (CaF2) 745 = Peek
KNEXA CIRCULATING SLEEVE
The Model KNEXA Circulating Sleeve provides a convenient way to establish or shut off communication between the
tubing and the annulus. Any number of these sleeves may be run in a tubing string, and any or all of them may be opened or closed in one run by standard wireline methods.
MATERIAL SELECTION
- 4140 L80
- 4140 P110
- 17-4PH Stainless Steel. 316 Stainless Steel
- 410 Stainless Steel
- 718 Inconnel. 9CH SOK MYS
- 13CH 8OK MYS (STD.) 13CH 90K MYS.
- 13CH 95K MYS
- 13CH 100K MYS.
WORKING PRESSURE RATING
- P.S.I. 5,800
- 4140 / 180 80,000 Yield
- 4140 / P110 110,000 Yield 8,000
- 17-4 S.S. 125,000 Yield 9,10

Benefits
- Features a nipple profile above and a packing bore above and below the communication ports.
- Ports can be closed without leaving any obstructions in the tubing once the shifting operation is completed
- The model B shifting tool is used to shift the inner sleeve by jarring up or down, jarring up will close the sleeve and jarring down will open it
- All premium threads are available. Flow areas between tubing and annulus when sleeve is open, 2.398 square inches.
- Sleeve is shown in closed position. All packing and o-rings are non-elastomer.
- Non-elastomer (peek, polyketone) has excellent chemical resistance to H2S and Co2
- peek compounds are suitable for service up to 500° F. It is a thermoplastic polymer and the melting point is approximately 650° F
- PTFP compounds are: 711 = 25% Carbon, Graphite 717 = 20% Calcium Fluoride (CaF2) 745 = Peek
KNEXO CIRCULATING SLEEVE
The Model KNEXO Circulating Sleeve provides a convenient way to establish or shut off communication between the tubing and the annulus. Any number of these sleeves may be run in a tubing string, and any or all of them may be opened or closed in one run by standard wireline methods.
MATERIAL SELECTION
- 4140 L80
- 4140 P110
- 17-4PH Stainless Steel. 316 Stainless Steel
- 410 Stainless Steel
- 718 Inconnel. 9CH SOK MYS
- 13CH 8OK MYS (STD.) 13CH 90K MYS.
- 13CH 95K MYS
- 13CH 100K MYS.
WORKING PRESSURE RATING
- P.S.I. 5,800
- 4140 / 180 80,000 Yield
- 4140 / P110 110,000 Yield 8,000
- 17-4 S.S. 125,000 Yield 9,10

Benefits
- Features a nipple profile above and a packing bore above and below the communication ports.
- Ports can be closed without leaving any obstructions in the tubing once the shifting operation is completed
- The model B shifting tool is used to shift the inner sleeve by jarring up or down, jarring up will open the sleeve and jarring down will close it
- All premium threads are available. Flow areas between tubing and annulus when sleeve is open, 2.398 square inches.
- Maximum temperature rating is 400°F. * Sleeve is shown in closed position.
KXA CIRCULATING SLEEVE
The Model KXA Circulating Sleeve provides a convenient way to establish or shut off communication between the tubing and the annulus. Any number of these sleeves may be run in a tubing string, and any or all of them may be opened or closed in one run by standard wireline methods.
MATERIAL SELECTION
- 4140 L80
- 4140 P110
- 17-4PH Stainless Steel. 316 Stainless Steel
- 410 Stainless Steel
- 718 Inconnel. 9CH SOK MYS
- 13CH 8OK MYS (STD.) 13CH 90K MYS.
- 13CH 95K MYS
- 13CH 100K MYS.
WORKING PRESSURE RATING
- P.S.I. 5,800
- 4140 / 180 80,000 Yield
- 4140 / P110 110,000 Yield 8,000
- 17-4 S.S. 125,000 Yield 9,10

Benefits
- Features a nipple profile above and a packing bore above and below the communication ports.
- Ports can be closed without leaving any obstructions in the tubing once the shifting operation is completed
- The model B shifting tool is used to shift the inner sleeve by jarring up or down, jarring up will close the sleeve and jarring down will open it
- All premium threads are available. Flow areas between tubing and annulus when sleeve is open, 2.398 square inches.
- Maximum temperature rating is 400°F.
- Sleeve is shown in closed position.
KXO CIRCULATING SLEEVE
The Model KXO Circulating Sleeve provides a convenient way to establish or shut off communication between the tubing and the annulus. Any number of these sleeves may be run in a tubing string, and any or all of them may be opened or closed in one run by standard wireline methods.
MATERIAL SELECTION
- 4140 L80
- 4140 P110
- 17-4PH Stainless Steel. 316 Stainless Steel
- 410 Stainless Steel
- 718 Inconnel. 9CH SOK MYS
- 13CH 8OK MYS (STD.) 13CH 90K MYS.
- 13CH 95K MYS
- 13CH 100K MYS.
WORKING PRESSURE RATING
- P.S.I. 5,800
- 4140 / 180 80,000 Yield
- 4140 / P110 110,000 Yield 8,000
- 17-4 S.S. 125,000 Yield 9,10
